Vibratory Ball Mill
Products Description
Our company developed the AGICO vibratory ball mill, a very efficient and energy-saving grinding equipment, by utilizing state-of-the-art grinding technology and making the best improvements possible. It gets around the traditional ball mill concept, which relies on the spinning of the cylinder to work. By using a unique high-frequency vibration technology, it dramatically increases grinding efficiency while consuming less energy. With our vibratory ball mill, which is particularly well-suited for processing fine and ultrafine powder, modern chemical, building materials, metallurgical, ceramic, and other sectors may achieve efficient production.
AGICO Cement Company is dedicated to offering you dependable, high-performing grinding equipment as well as thorough technical assistance. Please do not hesitate to contact us at any moment if you require technical assistance or purchase information regarding vibrating ball mills. Our knowledgeable team will offer you competent solutions.
Products Advantages
High efficiency
Our vibratory ball mill can greatly shorten the residence time of materials in the machine and boost production capacity since its grinding efficiency is two to five times that of conventional ball mills.
Energy conservation
AGICO vibratory ball mills have a 20% to 30% lower overall energy consumption than conventional ball mills, which can significantly minimize users' production and operating expenses.
Excellent grinding performance
After grinding, the particle size is uniform, adjustable, and well-formed (0.104-0.8 mm), which makes it appropriate for further processes.
Compact structure
The vibratory ball mill from AGICO is lightweight, compact, and features an integrated design and elastic support system.
Low noise
Our vibratory ball mill has a sound-isolating cover and runs quietly, both of which can significantly enhance the working environment.
Less pollution
Because the AGICO vibratory ball mill is a closed system, there is very little dust spillage. It uses high-quality, wear-resistant liners, which might effectively prevent contamination of the materials.
Application Scenarios
AGICO vibratory ball mills are widely used in the following industries because of their remarkable fine powder processing capabilities.
Building materials industry: ultrafine grinding of slag micropowder, quartz sand, cement additives, etc.
Metallurgy and chemical industry: Iron ore, non-ferrous metal ores, industrial catalysts, and pigments are all finely ground.
Ceramic refractory: production of refractory material raw ingredients and high-performance ceramic powders.
Electricity and Environmental Protection: Powdered limestone is ground for desulfurization in power plants and waste resource use.
New materials and food and pharmaceuticals: fillers for composite and electronic materials, as well as the production of hygienic powders for food and medicine.
Usage Instructions
Please take special note of the following operating points to guarantee the steady and effective operation of your vibratory ball mill: Maintaining the grinding medium refill rate between 75% and 85% of the grinding cylinder volume is advised. Impact energy transmission will be impacted by both excessively high and low rates. It is important to maintain uniformity and regulate the feed particle size below 25 mm. In the meantime, the hardness and moisture content of the material should be taken into account when adjusting the process parameters. It is important to balance the grinding capacity with the feeding speed. The output will be too coarse if it is too quick, and it is more likely to overgrind and use more energy if it is too slow. The ratio of water to material must be carefully regulated for wet grinding. While too much water will shorten the grinding time, too little water will change the slurry's fluidity. To increase the grinding intensity, the equipment's amplitude can be suitably adjusted within the permitted range; however, over-limit operation must be avoided as this could shorten the equipment's service life. The equipment will always be in optimal operating condition if these parameters are rationally optimized.
| Model | Capacity(t/h) | Feeding Size(mm) | Discharging Size(mm) | Barrel Volume(L) | Motor Power(kW) | Vibration Frequency(r/min) |
| AG100 | 0.05-0.15 | ≤25 | 0.8-0.104 | 100 | 2.2 | 960 |
| AG400 | 0.05-0.3 | ≤25 | 0.8-0.104 | 400 | 7.5 | 960 |
| AG1500 | 0.1-2 | ≤25 | 0.8-0.104 | 1500 | 21 | 960 |
| 2AG100 | 0.6-1.3 | ≤25 | 0.8-0.104 | 100 | 17-22 | 960 |
| 2AG200 | 0.75-2.5 | ≤25 | 0.8-0.104 | 200 | 22-37 | 960 |
| 2AG400 | 0.8-4.8 | ≤25 | 0.8-0.104 | 400 | 45-55 | 960 |
| 2AG600 | 1-8 | ≤25 | 0.8-0.104 | 600 | 45 | 960 |
| 2AG1200 | 1-16 | ≤25 | 0.8-0.104 | 1200 | 75-90 | 960 |
NOTE:The above are some of the model parameters. Please contact us for more information.
Hot Tags: vibratory ball mill, China vibratory ball mill manufacturers, factory, high energy ball milling for nanoparticle synthesis, black powder ball mill for sale, semi autogenous grinding mill, limestone grinding mill, ball mill grinding plant, sag ball mill
