RM800 Batching Plant
Products Description
AGICO RM800 Batching Plant is a compact towable concrete production unit built around a reversible drum mixer, delivering 10–15 m³/h with a 0.6–0.8 m³ batch volume. The aggregate bins, electronic weighing system, mixer, and 200L auto-dosing water tank of the AGICO RM800 Batching Plant are integrated on a single heavy-duty chassis with four pneumatic tires, ready for truck towing between job sites.
The AGICO RM800 Batching Plant is built for small-scale construction, rural roadwork, and remote-site concreting where the cost or logistics of a full batching plant cannot be justified.
high capacity
Advanced technology
Professional equipments
One-Stop services
Products Advantages
Competitive Advantage of AGICO RM800 Plant
10–15 m³/h On-Demand Output
The AGICO RM800 Batching Plant completes a full batch in approximately two minutes. Daily production reaches 80–120 m³, eliminating third-party ready-mix delivery costs for small to medium pours.
01
Reversible Drum, Dual-Role
Forward rotation lifts and mixes materials inside the drum of the AGICO RM800 Batching Plant; reverse rotation discharges the finished batch through the same opening. No separate gate mechanism is required, minimizing wear points and maintenance.
02
±2% Coarse-Fine Weighing
Digital load cells on the AGICO RM800 Batching Plant operate a two-speed feed: fast fill to near target weight, then slow trim to eliminate overshoot, keeping every batch on specification.
03
Towable Chassis, No Foundation
Four pneumatic tires and a tow bar allow the AGICO RM800 Batching Plant to be towed behind a standard truck. Leveling jacks stabilize the unit on leveled ground with zero civil works required.
04
200L Auto Water Dosing
The operator sets the water target once on the AGICO RM800 Batching Plant; the onboard pump and meter maintain consistent water-cement ratios batch after batch without manual adjustment.
05
Products Specification
The AGICO RM800 Batching Plant places three aggregate bins with a combined capacity of 800 kg, a central weigh hopper, the reversible drum mixer, and a 200L water tank on one welded chassis. Aggregate gates open in sequence under microprocessor control; load cells feed real-time weight data to the panel of the AGICO RM800 Batching Plant. A hydraulic skip lifts the weighed batch into the drum while metered water is injected. A 10 HP three-phase motor drives the drum at 13–14 rpm through a gearbox. Forward rotation mixes for 60–90 seconds; reversing the drum of the AGICO RM800 Batching Plant discharges concrete at 1.2–1.5 m height directly into a transit mixer or site dumper. Three drive variants are available: RM800E electric, RM800D 18HP diesel, and RM800A with PLC full automation.
Hot Tags: rm800 batching plant, China rm800 batching plant manufacturers, factory
Model Specification
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Model | RM800 | Mixer Type | Reversible Drum |
| Output | 10–15 m³/h | Batch Volume | 0.6–0.8 m³ |
| Drum Speed | 13–14 rpm | Drum Motor | 10 HP, 3-Phase |
| Aggregate Bins | 3 | Bin Capacity | 800 kg total |
| Max Aggregate Size | 80 mm | Water Tank | 200 L |
| Water Pump | 1 HP, 3-Phase | Agg. Accuracy | ±2% |
| Cement Accuracy | ±1% | Water Accuracy | ±1% |
| Discharge Height | 1.2–1.5 m | Chassis | 4 Tires + Tow Bar |
| Weight | 2,250–2,800 kg | Control | Microprocessor Panel |
| Power Supply | 415V / 3-Phase / 50Hz | Warranty | 12 Months |
FAQ
Q: How does the AGICO RM800 Batching Plant differ from AGICO's twin-shaft mobile plants?
A: The AGICO RM800 Batching Plant uses a single reversible drum rather than a twin-shaft forced mixer. The drum handles both mixing and discharging, which simplifies the mechanical layout of the AGICO RM800 Batching Plant and reduces the number of wear components. It is designed for the 10–15 m³/h output band where the capital cost of a twin-shaft plant is difficult to recover. The AGICO RM800 Batching Plant sits at the entry tier of AGICO's mobile product line, positioned between a standalone site mixer and a full-scale batching plant.
Q: What does the FOB price of the AGICO RM800 Batching Plant include? Does AGICO assist with export paperwork?
A: The FOB quotation for the AGICO RM800 Batching Plant covers the main unit complete with three aggregate bins, reversible drum mixer, electronic weighing system, 200L water tank and pump, control panel, and towable chassis. Ocean freight, destination duties, and local handling are excluded. AGICO supplies the full export document package for every AGICO RM800 Batching Plant shipment: commercial invoice, packing list, certificate of origin, and bill of lading. SGS or Bureau Veritas pre-shipment inspection can be arranged on request.
Q: How are spare parts for the AGICO RM800 Batching Plant sourced?
A: The AGICO RM800 Batching Plant uses industry-standard wear components-drum flights, bearings, load cells, and drive belts-that are widely available from multiple suppliers. AGICO maintains a dedicated spares inventory for the RM800 Batching Plant and dispatches confirmed orders within 48 hours. A recommended six-month wear-parts kit for the AGICO RM800 Batching Plant can be quoted alongside the plant order, ensuring uninterrupted production from day one.
